SOLDERING SYSTEM > HAKKO > THERMOMETER > FG-100
 


  Celsius type Fahrenheit type
Model name HAKKO FG-100
Resolution 1°C 1°F
Temperature measurement range 0∼700°C*1 32∼1300°F*1
Applicable sensor K (CA) type thermocouple
Measurement tolerance ±3°C (between 300 and 600°C)
±5°C(Other than above)
±6°F (between 572 and 1112°F)
±10°F(Other than above)
Display Besides measured temperatures, display indications include the following:

Display
Power supply 006P 9V dry battery (alkaline cell recommended)
Outline dimensions 68 (W) x 140 (H) x 38 (D) mm (excluding protrusions)
Weight 115 g (excluding battery)
Ambient temperature/ humidity range 0 - 40°C, 20 - 90%RH, without condensation
Environmental Condition Applicable rated pollution degree 2 (According to IEC/UL61010-1)
*1 Temperature sensor (191-212) can only be used to measure temperatures below 500°C (932°F). To measure higher temperatures, use an applicable temperature probe(see "5. REPLACEMENT PARTS AND OPTIONS").
*2 WhenBattery low alarmappears, be sure to replace the battery. Failure to do so will result in incorrect temperature measurements.
*3 This alarm indicates a sensor burnout. If this alarm occurs, replace the sensor.



The products shown above are only a small part of series,
please contact us for your enquiry.